| Internal
Resolution |
1,000,000
counts at 3mV/V |
| Display
Resolution |
Selectable
(1/10,000 NTEP approval pending) |
| Input
Sensitivity |
1uV/graduation
typical, 0.4uV/graduation minimum |
| Display
Increments |
Selectable
x1, x2, x5, x10, x20, x50, x100 |
| Decimal
Point |
Selectable
0 ~ 4 |
| Display |
7
Digits 7-Segment LED display, 14.2mm (0.56") high, with
annunciators (7 LED lamps) for function select, Stable, Center
Zero, Net, Print, kg, lb, and Low Battery display |
| Keyboard |
Standard-
18 button tactile keypad including Power On/Off key |
| Audio
Alarm |
Tone
for key entry confirmation and low battery alarm |
| A/D
Conversion Rate |
7.5
updates per second |
| Load
Cell Excitation Voltage |
9.7VDC
or 5VDC selectable. Drive up to six 350 ohm load cells |
| Analog
Input Range |
0.2mV/V
to 3.0mV/V maximum |
| Non-Linearity |
0.01%
of full scale or less |
| Over
Capacity |
Display
"CAP OL" when exceeds full scale capacity |
| Tare |
Standard
- Pushbutton tare, numeric tare entry & 10 predefined tare
recall |
| Auto
Zero Tracking |
Selectable
to 3.0 d by 0.5 d step |
| Motion
Window |
Key
in data 0..255 (1 = 0.5 d) |
| Calibration
Method |
Software
- Menu driven prompting |
| Units
of Measure |
Selectable
kg/lb/g/oz, up to 2 units displayable |
| RFI/EMI
Protection |
All
signal and excitation lines filtered to -65db min. @ 500MHz |
| Filtering |
Selectable
digital filter |
| RS-232C
data output |
COM
Port 1. Full Duplex or Bi-directional
COM Port 2. Simplex or Unidirectional (output only)
Selectable baud rates (1200,2400,4800,9600,19200), manual or auto
print, continuous data out or bi-directional communication |
| Remote
Display |
Standard
- Programmable as Main Indicator or Remote Display |
| Custom
Print Format |
Programmable,
up to 119 characters for Custom Print Format and up to 23
characters for Continuous Print Format |
| Set
Points |
Standard
- Selectable up to 2 Set Points for Low and High limit settings |
| Power |
100/115VAC
or 220/230VAC, 50-60Hz, 6VA with built-in Charger for 12VDC
2-2.3AH Rechargeable Sealed Lead Acid Battery (Battery Dimension
67 (H) x 178 (W) x 34 (D) mm, is optional) |
| Current
Consumption |
100mA
+ 30mA per 350 ohm load cell |
| Operating
Temp |
-10
degrees C to + 40 degrees C |
| Relative
Humidity |
Maximum
90% RH, Non-condensing |
| Dimensions |
140
(5.5")H x 230 (9.1")W x 90 (3.5")D mm - Stainless
Steel |
| Shipping
Weight |
4.7lb
(7.1lb with optional battery) - Stainless Steel |
| Enclosure |
Stainless
Steel, NEMA 4-X |
| Warranty |
One
Year Limited Warranty |